Journal Papers

  • M. Ali, M. Al-Hajjar, LM Jennings, J. Fisher, Influence of input kinematics and simulator design on wear of ceramic-on-ceramic bearings under edge loading conditions. In draft.
  • M. Ali, S. Partridge, M. Al-Hajjar, S. Williams, J. Fisher, LM. Jennings, Influence on hip joint simulator design and mechanics on the wear and creep of metal-on-polyethylene bearings, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine.
  • M. Ali and K. Mao, Contact mechanics and wear simulations of hip resurfacing devices using computational methods, Acta of Bioengineering and Biomechanics, Vol. 16, No. 2, pp.103,110, 2014.
  • M. Ali and K. Mao, Contact Analysis of Hip Resurfacing Devices Under Normal and Edge Loading Conditions, IAENG Special Issue Journal, Engineering Letters, Volume 20 Issue 4, Pages 317-329.

 

Conferences, Papers and Posters

  • M. Ali, Mazen Al-Hajjar, Louise M. Jennings, John Fisher.  Wear and Deformation of Metal-on-Polyethylene Bearings under Edge Loading Conditions due to Variations in Component Positioning. MeDe Innovation Annual Conference 2017.
  • Murat Ali, Mazen Al-Hajjar, Louise M. Jennings, John Fisher. Variations in Component Positioning Leading to Dynamic Separation and Edge Loading Influences the Deformation and Wear of Metal-on-Polyethylene Hip Replacement Bearings. ORS 2017.
  • Murat Ali, Mazen Al-Hajjar, Louise M. Jennings, John Fisher. Wear and deformation of metal-on-polyethylene hip replacements under edge loading conditions due to variations in surgical positioning. International Society for Technology in Arthroplasty (ISTA), 2016.
  • Murat Ali, Mazen Al-Hajjar, Jonathan Thompson, Graham H. Isaac, Louise M. Jennings, John Fisher. Edge Loading and Wear of Ceramic-on-Ceramic Bearings Under Variations in Component Positioning. International Society for Technology in Arthroplasty (ISTA), 2016.
  • M. Ali, M. Al-Hajjar, LM. Jennings, J. Fisher. Dynamic Separation, Wear And Deformation Of Metal-On-Polyethylene Bearings Under Variations In Component Positioning. British Orthopedic Society (BORS). Accepted for Oral Presentation. Sept 2016.
  • Murat Ali, Mazen Al-Hajjar, Louise M. Jennings, John Fisher. Wear and deformation of metal-on-polyethylene hip replacements under edge loading conditions due to variations in surgical positioning. Wellcome Trust grant application visit poster presentation. May 2016.
  • L.W. Etchels, M. Al-Hajjar, M. Ali, J. Thompson, G. Isaac, J. Fisher. A geometric model to predict the occurrence and severity of edge contact for different acetabular cup orientations. Wellcome Trust grant application visit poster presentation. May 2016.
  • Murat Ali, Mazen Al-Hajjar, Louise M. Jennings, John Fisher. Enhanced Preclinical Testing of Hip Joint Replacements. MeDe Innovation Annual Conference 2016.
  • M. Ali, Mazen Al-Hajjar, Louise M. Jennings, John Fisher. Enhanced Preclinical Testing of Hip Joint Replacements. MeDe Innovation Annual Conference 2016.
  • M. Al-Hajjar, OL. Jones, M. Ali, S. Williams, L.M. Jennings, J. Fisher, G.H. Issac. Effect of Surgical Variations on the Function and Tribological Performance of Hip Joint Replacement. MeDe Innovation Annual Conference 2016.
  • M. Ali, S. Partridge, M. Al-Hajjar, S. Williams, J. Fisher, L M. Jennings, Preclincal hip simulation – Experimental validation of an electromechanical hip joint simulator. Mede Innovation Workshop 2015. Oral presentation.
  • M. Al-Hajjar, OL. Jones, M. Ali, LM. Jennings, J. Fisher. Our approach to adoption through International Standards. Mede Innovation Workshop 2015. Oral presentation.
  • M. Ali, Mazen Al-Hajjar, Louise M. Jennings, John Fisher. Wear and Deformation of Metal-on-Polyethylene Hip Replacements under Variations in Surgical Positioning, ORS 2016 Abstract. Accepted. Poster.
  • M. Ali, M. Al-Hajjar, J. Fisher, LM. Jennings, Effect of input kinematics on the wear of ceramic-on-ceramic hip joint replacements under standard ad microseparation conditions, BORS 2015 Abstract. Oral presentation.
  • M. Ali; S. Partridge, M. Al-Hajjar, S. Williams, J. Fisher, L M. Jennings, Wear of cross-linked polyethylene using electromechanical and pneumatic hip joint simulators, Musculoskeletal biomechanics and tribology, MEIbioeng 2015.
  • M. Ali, M. Al-Hajjar, J. Fisher, L M. Jennings, Wear of ceramic-on- ceramic hip joint replacements under standard and microseparation conditions with two axes and three axes of rotation, ISTA 2015 Abstract. Poster.
  • M. Ali, M. Al-Hajjar, J. Fisher, L M. Jennings, Wear of Cross-linked UHWMPE Hip Replacements using an Electromechanical Hip Joint Simulator Under Two-axis and Three-Axis of Rotation Conditions, ISB2015. Oral present.
  • M. Ali, S. Partridge, M. Al-Hajjar, S. Williams, J. Fisher, LM. Jennings, Wear of Crossed-Linked UHMWPE using Electromechanical and Pneumatic Hip Joint Simulators, ORS 2015 Abstract 893. Poster.
  • M. Ali, JHA. Vlaskamp, NN. Eddin,; B. Falconer, C. Oram, Technical development and socioeconomic implications of the Raspberry Pi as a learning tool in developing countries, 5th Computer Science and Electronic Engineering Conference (CEEC), 2013, pp.103-108, 17-18 Sept. 2013. Oral presentation.
  • M.Ali and K. Mao, Mechanical and Tribological Study of Hip Resurfacing Devices, Book of Abstracts, International Conference of the Polish Society of Biomechanics: Biomechanics 2012, Bialystok 2012. pp. 19-20. Oral presentation.
  • M. Ali and K. Mao, Computational Contact Modelling of Hip Resurfacing Devices, Lec- ture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2012, WCE 2012, 4-6 July, London, U.K. pp. 2054-2059, 2012. Awarded Best Paper of The 2012 International Conference of Mechanical Engineering. Oral present.
  • M. Ali and K. Mao, The Use of Computational and Theoretical Methods to Study Edge Loading of Hip Resurfacing Devices, Institute of Digital Healthcare: Digital Innovation and Technology for Patient Benefit, The University of Warwick.  November, 2011. Poster.

 

Personal invitations

  • Personal  invitation to  MeDe Innovation  research  workshops – Presented  Preclincal hip simulation – Experimental validation  of an electromechanical hip joint simulator (Dec 2015).
  • Personal  invitation to  present  at  Mede Annual  Conference  2015 – Stratified  design and  manufacture   of orthopaedic  implants  Enhanced  preclinical  testing  of hip  joint replacements.
  • Personal invitation to deliver a speech at The 3rd Annual World Congress of Orthopaedics 2015 (WCORT-2016) in Theme 2-8: Hip.
  • Personal invitation to deliver a speech at The 2nd Annual World Congress of Orthopaedics 2015 (WCORT-2015) in BP 503: Hip Arthroscopy, Replacement and Revision.
  • Personal invitation to deliver a speech at The 1st Annual World Congress of Orthopaedics 2015 (WCORT-2015) Speaker of Part 3-6: Hip and Femur.

 

Book Chapters

  • M. Ali, M. Al-Hajjar, L.M. Jennings, Chapter 31. Tribology of UHMWPE in the hip, UHMWPE Biomaterials Handbook, 3rd Edition.
  • M. Ali and K. Mao, Contact Analysis of Hip Resurfacing Devices under Normal and Edge Loading Conditions, IAENG Transactions on Engineering Technologies. Series Title: 7818, Chapter 14.

 

Theses

  • M. Ali, Computational and Theoretical Modelling of Orthopaedic Hip Implant Devices, University of Warwick, School of Engineering, Doctor of Philosophy (2013).
  • M. Ali, C. Emery, A. Field, J. Robertson, C. Woolliscroft, S. Woolliscroft, Brunel Racing, Formula Student 2006 Group Major Masters Project, School of Engineering and Design, Brunel University, March 2006.
  • M. Ali, Design, Development and Manufacture  of the Suspension Uprights for the Formula Student Car BR-6, Year 3 Mechanical Engineering Degree Thesis, School of Engineering and Design, Brunel University, March 2005.

 

Key Presentations

  • M.Ali, Data management of publications., iMBE Institute Meeting (Apr 2015).
  • Lee Etchels, Mazen Al-Hajjar, Murat Ali, Louise M. Jennings, Sophie Williams, Jonathan Thompson, Graham H. Isaac, John Fisher, iMBE, The Effect of Cup Inclination, Version and Tilt Angle on the Occurrence and Extent of Edge Contact – A Geometric Model
  • LM. Jennings, M. Ali, P.Wood.,  Laboratory processes and Engineering Design, iMBE, The University of Leeds (Feb 2016).
  • M. Ali, M. Al-Hajjar, J. Fisher, LM. Jennings, Effect of Input Kinematics on the Wear of Ceramic-on-Ceramic Hip Joint Replacements under Standard and Microseparation Conditions. iMBE Institute Meeting (Sept 2015).
  • M. Ali, Simulator data analysis using MATLAB, Virtual Group Meeting. iMBE. The University of Leeds (Jun 2015).
  • M. Ali, M. Al-Hajjar, S. Williams, LM. Jennings, J. Fisher, Effect of Cup Version, Tilt and Inclination Angle on the Occurrence of Edge Loading – A Geometric Model. DePuy and iMBE DTP Partnership Meetings (Apr and Jun 2015).
  • M. Ali, Analysing the wear and creep and polyethylene using Redlux. iMBE lab meeting (Jun 2015).
  • M. Ali, M. Al-Hajjar, J. Fisher, LM. Jennings, EM13 electromechanical simulator ceramic-on-ceramic six-axis load cell torque outputs.  iMBE. The University of Leeds. Murat Ali, Mazen Al-Hajjar, John Fisher, Louise M Jennings (Apr 2015).
  • M. Ali; S. Partridge, M. Al-Hajjar, S. Williams, J. Fisher, L M. Jennings, Wear of Cross-Linked UHMWPE using Electromechanical and Pneumatic Hip Joint Simulators. iMBE Institute Meeting. The University of Leeds (Mar 2015).
  • M. Ali, M. Al-Hajjar, J. Fisher, LM. Jennings. Wear of Hip Replacements using Electromechanical Hip Joint Simulators.  DePuy Technology Partnership Research Meeting (Nov 2014).
  • M. Ali, M. Al-Hajjar, J. Fisher, LM. Jennings. Validation of a new electromechanical multi-station hip joint simulator.  Doctoral training students welcome meeting and iMBE institute meeting. The University of Leeds (Jun and Sept 2014).
  • M. Ali, LM. Jennings, J.Fisher, An introduction to medical technologies at Leeds. Middle East Technical University (Sept 2014).
  • M. Ali and K. Mao, Computational and Theoretical Contact Modelling of Hip Implant Devices with the Application of Wear Simulations. Middle East Technical University (Sept 2014).
  • M. Ali, M. Al-Hajjar, LM. Jennings, Polyethylene liner soak and weighing. iMBE laboratory meeting. The University of Leeds. (Dec 2013).
  • M. Ali and K. Mao, Mechanical and Tribological study of Orthopaedic devices research: Progress review, discussion and forward planning, Smith and Nephew (Oct 2010).
  • M. Ali and K. Mao, Mechanical and Tribological study of Orthopedic Devices for Articulating Joints – Research Interests, Smith and Nephew (Apr 2010).
  • M. Ali and K. Mao, Mechanical and Tribological study of Orthopedic Devices for Articulating Joints. Cafe Scientique. The University of Warwick (Apr 2010).
  • M. Ali and K. Mao, Mechanical and Tribological Study of Orthopedic Devices. Presentation to orthopedic research group at Warwick Medical School and at the MSc Biomaterials module (Mar 2010).
  • M. Ali, Goodrich GTF project kick off presentation, Goodrich GTF work force layout, Goodrich GTF Exhaust Project Proposal (Jun 2008).
  • M. Ali, April 2008 to December 2008: Monthly Alstom Aerospace Engineering Resource Planning presentations (Apr to Dec 2008).
  • M. Ali, Goodrich GTF Project Request for Quotation Presentation (Mar 2008).
  • M. Ali, Six Sigma Project Storyboard – Honeywell TFE-731 Stage 3 LPT Disk Shaft Diameter Gauge. Alstom Power Systems (Jan 2008).
  • M. Ali, A. Champion, E. D’Alconzo, M. Daly, A. Farah, M. Jones, D. Perry, J. Qu´enaut, Diaphragm Key Adjustment for Steam Turbines. Alstom Power Service (Jun 2007).
  • M. Ali and J. Robertson. Formula Student Brunel Racing presentation, Nissan Technical Centre Europe (Nov 2015).
  • M. Ali, Brunel Racing open day presentation (Oct 2005).
  • M. Ali, Presentations at Eli Lilly and Company to engineers, project managers and departmental heads (2003-04).